Processing fiberglass sand filled pipes

Processed fiberglass sand pipes are usually used in various professional fields such as essential, testing (electronic function) machines, chemical industry furnaces, desulfurization furnaces, smelting furnaces, location anti-corrosion, boring anti-corrosion, food air drying anti-corrosion, ironing anti-corrosion, SMT surface preparation, road construction component anti-corrosion, chemical industry chain tooth furnaces, Licheng heating anti-corrosion, etc.

Due to the practical and widespread use of replacing bacterial combustible machines, the desired items are placed through horizontal placement functions:

1、 Master the opening of processing fiberglass sand pipes:

1. Before opening the processing fiberglass sand pipe, discharge the carbon buildup from the furnace bridge, discharge the carbon buildup from the furnace bottom, attend the addition of particulate fuel, close the material box cover, and open the material valve;

2. Turn on the anti-corrosion power supply for operation, inspect whether the parts and water pipes are outstanding, and inspect whether they can supply enough water according to the requirements. Close the water inlet and outlet valves of the combustible machine, and form a tower type combustible chamber interlayer to fill with water;

3. Set the air supply gear to a very small position, inject sufficient and light overhead, open the transportation system extensively, open the furnace door gently to fully supply air, close the furnace door, open the fumigation computer system, and suddenly adjust the air supply gear to sufficient. The speed of cultivation and air supply should be suddenly mastered, and it is important not to slow down too quickly. Maintain the -3fenzhong system for internal treatment and improvement.

Processing fiberglass sand filled pipes can easily lead to accidents

4. The fuel should be capable of producing pure wood chips and bacterial particles that must run at 6-8mm, and it is definitely not suitable to run particle fuels with particle debris and magazine sprockets. Do not inject the iron sword into the material box during feeding! If the fuel quality is poor or there are installed items injected into the tank as anti-corrosion damage, it will not be limited by the warranty;

5. It should be possible to perform necessary or other anti-corrosion operations internally, preferably with negative pressure and stop positive pressure. If there is a lot of positive pressure, prepare and install induced draft anti-corrosion;

6. When processing fiberglass sand pipes, it should be possible to close the material box cover and do not hesitate. When shutting down the furnace, it is important to close the isolating valve and not rotate it;

7. If there is any obstruction or jamming of the material, it is generally necessary to use a small hut to poke it down. Cutting must not be done with iron wire or steel, and do not get entangled in the screw, as it may cause damage to the screw; Processing fiberglass sand pipes.