Glass fiber reinforced plastic arch cover plate to prevent odor emission can be used in sewage treatment plants

When adding a fiberglass arch cover plate above the sewage tank, the waste gas generated in the sewage tank is isolated from the air. An air outlet is added on the surface of the gas collection hood and a ventilation pipeline is installed. The waste gas enters the waste gas purification tower through the ventilation pipeline. To increase the collection of waste gas, a fiberglass fan is installed in front of the purification tower, which sucks the waste gas into the purification tower. The waste gas is sprayed in two stages inside the tower. If the waste gas is acidic, it is absorbed through alkaline circulation, If the waste gas is alkaline, acid solution circulation spray absorption is used to improve the efficiency of waste gas treatment and meet relevant standards for emissions.

The production process of fiberglass arch cover plate is simple, and the production of steel structure and membrane materials is carried out in the factory, with guaranteed quality; Quick installation: After the processed steel structure and membrane materials are transported to the site, they can be easily installed, and the basic installation time is short. Especially for the old pool renovation project, it can be lifted as a whole without affecting the operation of the pool equipment.

The common colors of fiberglass cover plates for sewage tanks include gray, black, blue, green, red, and other colors, which can blend the scenery with the physical environment. The specific gravity of the fiberglass cover plate for the sewage tank is about 1.8, and its weight is only 1/4 of that of steel and 2/3 of that of aluminum. The strength of the fiberglass cover plate for the sewage tank is ten times that of hard polyvinyl chloride, and its complete strength greatly exceeds that of aluminum, reaching the level of ordinary steel.

Glass fiber reinforced plastic arch cover plate is a composite material with excellent comprehensive performance, which has been widely used in many fields such as petroleum, chemical industry, metallurgy, water supply and drainage, etc. The reason why glass fiber reinforced plastic products can develop rapidly is because they have many advantages that other materials cannot compare, especially in terms of corrosion resistance. The main performance characteristics of this product are as follows:

(1) Excellent corrosion resistance, temperature resistance, and excellent insulation performance.

(2) Lightweight and high in strength, easy to install. The proportion of fiberglass products is only 1/3 to 1/4 of that of steel, and the strength is high. Therefore, the transportation and installation of fiberglass equipment are very convenient.

(3) Low operation and maintenance costs. Glass copper products themselves have excellent corrosion resistance and do not require regular anti-corrosion and other maintenance like metal products. Obviously, maintenance costs have been greatly reduced during equipment operation.

(4) UV resistance: The surface of the fiberglass arch cover plate is sprayed with three coats of colored gel coat resin, which contains high-strength UV resistant agents to achieve good UV resistance and will not fade after long-term use.

(5) Other excellent performance: impact resistance, maintenance free, easy processing, anti slip, insulation and insulation, etc.